Modules Reference: Airspeed Sensor (Driver)

ets_airspeed

Source: drivers/differential_pressure/ets

Usage

ets_airspeed <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es)
     [-X]        External I2C bus(es)
     [-b <val>]  bus (board-specific internal (default=all) or n-th external
                 (default=1))
     [-f <val>]  bus frequency in kHz

   stop

   status        print status info

ms4525_airspeed

Source: drivers/differential_pressure/ms4525

Usage

ms4525_airspeed <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es)
     [-X]        External I2C bus(es)
     [-b <val>]  bus (board-specific internal (default=all) or n-th external
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-T <val>]  Device type
                 values: 4525|4515, default: 4525

   stop

   status        print status info

ms5525_airspeed

Source: drivers/differential_pressure/ms5525

Usage

ms5525_airspeed <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es)
     [-X]        External I2C bus(es)
     [-b <val>]  bus (board-specific internal (default=all) or n-th external
                 (default=1))
     [-f <val>]  bus frequency in kHz

   stop

   status        print status info

sdp3x_airspeed

Source: drivers/differential_pressure/sdp3x

Usage

sdp3x_airspeed <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es)
     [-X]        External I2C bus(es)
     [-b <val>]  bus (board-specific internal (default=all) or n-th external
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-a <val>]  I2C address
                 default: 33
     [-k]        if initialization (probing) fails, keep retrying periodically

   stop

   status        print status info

results matching ""

    No results matching ""