This page has moved to https://docs.px4.io/master/en/test_cards/mc_04_failsafe_testing.html.
Click here if you are not redirected.
Test MC_04 - Failsafe Testing
❏ Verify RC Loss action is Return to Land
❏ Verify Data Link Loss action is Return to Land and the timeout is 10 seconds
❏ Verify Battery failsafe
❏ Action is Return to Land
❏ Battery Warn Level is 25%
❏ Battery Failsafe Level is 20%
❏ Battery Emergency Level is 15%
❏ Take off in Altitude mode
❏ Move at least 20 meters away home position
❏ RC loss
❏Turn off RC and check the vehicle returns to home position, wait for the descent and turn on the RC and take over.
❏ Disconnect telemetry, vehicle should return to home position after 10 seconds, wait for the descent and reconnect the telemetry radio
Switch to Altitude Mode
❏ Make sure roll, pitch and yaw sticks respond like in Stabilize mode
❏ Throttle should control altitude, and when the stick is centered it must maintain altitude
Switch to Position Mode
❏ When the sticks are centered, it must maintain position
❏ Move roll, pitch and yaw and check the vehicle is moving according to the inputs
❏ Center the sticks again and check the vehicle maintains position
Wait for Battery Failsafe to Trigger
❏ Confirm the warning message is received in QGC
❏ Confirm the vehicle returns to land
❏ Confirm the vehicle lands.