Pixhawk 3 Pro

The Pixhawk 3 Pro is based on the FMUv4 (Pixracer) hardware with some upgrades and additional features, designed by Drotek and PX4.

Quick Summary

The main hardware documentation is here: https://pixhawk.drotek.com/en/

  • Microcontroller: STM32F469; Flash size is 2MiB, RAM size is 384KiB
  • ICM-20608-G gyro / accelerometer
  • MPU-9250 gyro / accelerometer / magnetometer
  • LIS3MDL compass
  • Sensors connected via two SPI buses (one high rate and one low-noise bus)
  • Two I2C buses
  • Two CAN buses
  • Voltage / battery readings from two power modules
  • FrSky Inverter
  • 8 Main + 6 AUX PWM outputs (Separate IO chip, PX4IO)
  • microSD (logging)
  • S.BUS / Spektrum / SUMD / PPM input
  • JST GH user-friendly connectors: same connectors and pinouts as Pixracer

results matching ""

    No results matching ""